Fireball Hydro Foam

Fireball Hydro Foam is the easiest coating you can apply to your vehicle. Hydro Foam contains SiO2 (the same base as hard ceramic coatings) and leaves behind a slick, hydrophobic layer of protection to every surface it touches. Hydro Foam is a bit of a cheat in the detailing world - it really shouldn't be this easy! Simply foam on the vehicle, rinse away and you'll be left with a high shine surface carrying up to 6 weeks of protection. Hydro Foam is perfect as a stand alone protectant or top-up to a ceramic coating.

Hydro Foam is recommended as a post-wash sealant instead of a 'pre-wash foam'. After performing a thorough wash down of your vehicle apply the Hydro Foam using a good quality foam lance and then after 30 seconds simply rinse off the foam and you'll be in awe at the results. Safe for paintwork, glass, wheels, plastics, rubbers and everything else on the exterior of your vehicle thanks to the pH neutral formula. Hydro Foam is highly concentrated with a dilution ratio of 1:15-1:20; equating to around 50-65ml per 1L foam lance.

Instructions

You should use Hydro Foam through a good quality foam lance after washing down your vehicle. Hydro Foam is pH neutral and safe for all surfaces of your vehicle.

Apply Hydro Foam to a cool surface in a shaded area. Do not apply to a hot car. Always apply to a wet surface to ensure the product can create even coverage and not dry upon contact.

Foam Lance
Hydro Foam should be diluted with a ratio of 1:15 to 1:20. This equates to 50 - 65ml of Hydro Foam to a 1L foam lance. Any quality foam lance will product a thick foam with this dilution. For basic non-adjustable foam lances or hose foam lances you may need to use a bit more product. Allow the product to dwell on your vehicle for up to 30 seconds and rinse thoroughly. If you see the product drying up rinse it off immediately.