Menzerna Super Finish SF3500
3 |
$79.95
Inventory Availability
Menzerna Super Finish 3500
Menzerna Super Finish 3500 is a fine polish, formulated to eliminate fine imperfections such as very light swirls, light holograms. Super Finish 3500 provides amazing workability and finish - and a little goes a long way; creating a crisp and deep shine. SF3500 removes light polishing marks, buffer trails or holograms and is suggested for use with fine finishing pads. This polish can be used after Menzerna Medium Cut Polish 2400 to fully refine the paintwork finish eliminating any fine imperfections and boosting gloss levels and depth within the paint, ready for a wax or sealant to protect.
- Can be used by hand or machine - and suitable for both random orbital and rotary polishers.
- Bodyshop safe with no fillers, silicones, waxes or glazes.
- Diminishing abrasives.
The Menzerna OEM range are designed for most paint finishes including solid colour, regular clear coat and CeramiClear (e.g. late model Mercedes and BMW). All Menzerna polishes have excellent lubricating properties so do not need water to keep them working, simply work the polish by multiple passes to break down abrasive clusters and then wipe away the thin residue with a clean microfibre cloth.
Cut Factor: 4
Gloss Factor: 10
Factors are based 1 lowest (gloss /cut) to 10 highest (gloss/cut)
By Hand
Match the correct hand applicator for usage. Apply a few drops of polish to the end of the hand applicator; and work in a back and forth motion until the area starts to dry. Overlap your passes and upon completion buff off excess product straight away with a microfibre cloth. Work a relatively small section - 30cm x 30cm until the vehicle is complete.
By Machine
Clean, decontaminate (with a clay bar or similar) and ensure the surface is dry before starting. Match the correct machine pad grade to the polish being used and start by priming the pad with 3 or 4 dots of polish.
First work the polish on slow speed to spread it evenly; then ramp the speed up. We recommend speed 1-2 for spreading; 3-4 for light polishing and 3-5 for cutting (on a 6 speed machine). Wipe off the polish immediately and repeat all sections until complete.
New Zealand Standard Shipping
- Flat Rate NZ Wide - $9 (Fastway Couriers) or $14 (Post Haste)
- Orders Over $150 - Free Shipping (Fastway Couriers)
- North Island 1-2 Working Days
- South Island 2-3 Working Days
Australia
- Calculated At Checkout
- 10-20 Working Days
Fiji
- Calculated At Checkout
- 10-20 Working Days
In-Store Pick Up
- 33 Walls Road, Penrose, Auckland
In-Store Purchasing
- 33 Walls Road, Penrose, Auckland
- 7B Birmingham Drive, Middleton, Christchurch
Standard Payment Options
- VISA, Mastercard, American Express
- PayPal Express
- POLi Internet Banking
- Manual NZ Bank Transfer
Q-Card Accepted
OxiPay
- Buy Now, Pay Later
- 4 Fortnightly Payments
- No Interest, No Fees When Paid On-Time
- Oxipay Up To $1000 Of Your Order (Maximum Order $1500)
Afterpay
- Buy Now, Pay Later
- 4 Fortnightly Payments
- No Interest, No Fees When Paid On-Time
In-Store Payments
- VISA, Mastercard, American Express
- Cash
- Q-Card
- Oxipay
- Afterpay
