Menzerna Cut Polish CP2400

Menzerna Cut Polish CP2400

Menzerna Medium Cut Polish 2400 is a medium polish designed to remove compounding marks, fine scratches and light to medium oxidation. Unlike older style compounds this polish is non-gritty and smooth cutting. CP2400 has been designed to remove up to 2500 grit sanding marks, and is suggested for use with Light Cutting or Polishing Pads. This polish can be used after Menzerna Heavy Cut on cars that have light to medium paint imperfections that need polishing out. This can also be used as a single set for some vehicle paints due to the amazing finishing properties in this formula.

• Can be used by hand or machine - and suitable for both random orbital and rotary polishers.
• Bodyshop safe with no fillers, silicones, waxes or glazes.
• Diminishing abrasives.

The Menzerna OEM range are designed for most paint finishes including solid colour, regular clear coat and CeramiClear (e.g. late model Mercedes and BMW). All Menzerna polishes have excellent lubricating properties so do not need water to keep them working, simply work the polish by multiple passes to break down abrasive clusters and then wipe away the thin residue with a clean microfibre cloth.

For even further depth and definition to the paint, especially on dark colours you can follow on with Menzerna SF3500 or SF3800.

Cut Factor: 6
Gloss Factor: 8
Factors are based 1 lowest (gloss /cut) to 10 highest (gloss/cut)

By Hand

Match the correct hand applicator for usage. Apply a few drops of polish to the end of the hand applicator; and work in a back and forth motion until the area starts to dry. Overlap your passes and upon completion buff off excess product straight away with a microfibre cloth. Work a relatively small section - 30cm x 30cm until the vehicle is complete.

By Machine

Clean, decontaminate (with a clay bar or similar) and ensure the surface is dry before starting. Match the correct machine pad grade to the polish being used and start by priming the pad with 3 or 4 dots of polish.

First work the polish on slow speed to spread it evenly; then ramp the speed up. We recommend speed 1-2 for spreading; 3-4 for light polishing and 3-5 for cutting (on a 6 speed machine). Wipe off the polish immediately and repeat all sections until complete.

Safety Data Sheet Available Here

New Zealand Standard Shipping

• Flat Rate NZ Wide - $9 (Fastway Couriers) or $14 (Post Haste)
• Orders Over $150 - Free Shipping (Fastway Couriers)
• North Island 1-2 Working Days
• South Island 2-3 Working Days

Australia

• Calculated At Checkout
• 10-20 Working Days

Fiji

• Calculated At Checkout
• 10-20 Working Days

In-Store Pick Up

• 33 Walls Road, Penrose, Auckland

In-Store Purchasing

• 33 Walls Road, Penrose, Auckland
• 7B Birmingham Drive, Middleton, Christchurch

Standard Payment Options

• VISA, Mastercard, American Express
• PayPal Express
• POLi Internet Banking
• Manual NZ Bank Transfer

Q-Card Accepted

OxiPay

• Buy Now, Pay Later
• 4 Fortnightly Payments
• No Interest, No Fees When Paid On-Time
• Oxipay Up To $1000 Of Your Order (Maximum Order $1500)

Afterpay

• Buy Now, Pay Later
• 4 Fortnightly Payments
• No Interest, No Fees When Paid On-Time

In-Store Payments

• VISA, Mastercard, American Express
• Cash
• Q-Card
• Oxipay
• Afterpay