// FREE SHIPPING ON ORDERS OVER $150 // BUY NOW PAY LATER WITH OXIPAY & AFTERPAY //

Chemical Guys V36 Optical Grade Cutting Compound

  |  

Chemical Guys

CGGAP_V36_16

Chemical Guys V36 Optical Grade Cutting Compound

Chemical Guys V36 Optical Grade Cutting Polish is the great all-around cutting-polish that eliminates light to moderate paint defects and imperfections from all paint types, then finishes like a fine polish. V36 is formulated for fast cutting with optical grade diminishing abrasives that restore both old paint finishes, and freshly-painted panels. The advanced polish cuts through light and moderate paint defects, swirls, scratches, and oxidation, then finishes with superior luster fit for final polish results on most paints. V36 Optical Grade Cutting Polish is the first cutting-polish that works on scratch-resistant and ceramic clear coat finishes. The diminishing micro abrasives work fast with true-cut accuracy; there are no fillers, so the results you see are the true results you get. The optical-grade abrasives quickly remove 2000-2500 grit sanding marks and moderate defects and scratches. V36 delivers fast cutting power with fewer passes to quickly restore conventional clear coat, ceramic clear coat, and traditional single stage paint finishes. V36 is the preferred finishing polish for repairing optical plastic after wet-sanding and compounding faded and hazy headlights and taillights. The water-based formula is blended with advanced lubricants for extended worktime and a minimal dusting profile. Use Chemical Guys V36 Optical Grade Cutting Polish to remove light to moderate defects, swirls, and scratches from any paint finish.

  • Removes light to moderate swirls, scratches, oxidation, and paint defects
  • Works as a one-step polish or creates a superior base for final polishing
  • Fine balance of cutting and finishing power across many paint types and finishes
  • Optical grade micro abrasive technology for enhanced clarity and precision
  • Formulated without fillers; the results you see are the results you get
  • Removes 2000-2500 grit sanding scratches
  • Designed for use with DA and rotary polishers
  • Available in 4 ounce and 16 ounce sizes

V36 Optical Grade Cutting Polish is the first optical grade cutting polish to use precision diminishing abrasives to eliminate light to moderate paint defects and imperfections. V36 is blended with optical-grade micro abrasives that remove paint imperfections and defects, then finish with the clarity and precision that perfectionists demand. V36 cuts hard to remove moderate swirls, scratches, oxidation, and restore luster and gloss to sun-faded paint. V36 contains no fillers or oils, so the results you see are the results you get. Use V36 Optical Grade Cutting Polish with any dual action or rotary polisher to remove scratches and surface defects, restore luster and shine, and make any paint finish look vibrant, reflective, and new.

Paint technology is one of fastest growing segments of the automotive industry. Vehicle manufacturers now use advanced paint technology like ceramic clear coats and water-based paints that last longer than ever imagined. These advancements in scratch-resistant and ceramic clear coats have changed the way professionals and enthusiasts maintain the showroom fresh look of painted finishes. Scratch-resistant and ceramic clear coats resist scratches and blemishes in most situations, but also pose a difficult challenge when removing the swirls, scratches, marring, and holograms that do end up in the paintwork.

QTY: 1x 16oz Squeeze Bottle (475ml)

Directions: Work on cool surface. Shake well. Always work 2’ x 2’ section at a time.

DA Application: Apply 4-5 drops to desired pad. Prime pad with Chemical Guys Pad Conditioner. Spread on speed setting 1. Set DA machine to speed setting 5-6. Using moderate pressure, work area in 2-3 passes until compound becomes clear. Follow with light pressure to finish. Remove residue with clean microfiber cloth. Follow with V38 Optical Grade Hybrid Compound for perfect clarity.

Rotary Application: Apply 4-5 drops to desired pad. Prime pad with Chemical Guys Pad Conditioner. Set machine to between 1000-1500 rpms to spread product. Work in 2’ x 2’ section at a time. Using just the weight of the machine (no pressure) work area in 3-4 passes until compound becomes clear. For final pass adjust speed setting to between 1200-1800 rpms. Work until optical clarity is achieved. Remove residue with clean microfiber cloth. Follow with V38 Optical Grade Hybrid Compound for perfect clarity.

New Zealand Standard Shipping

  • Flat Rate NZ Wide - $9 (Fastway Couriers) or $14 (Post Haste)
  • Orders Over $150 - Free Shipping (Fastway Couriers)
  • North Island 1-2 Working Days
  • South Island 2-3 Working Days

Australia

  • Calculated At Checkout
  • 5-15 Working Days

Fiji

  • Calculated At Checkout
  • 10-20 Working Days

In-Store Pick Up

  • 33 Walls Road, Penrose, Auckland
  • Monday To Friday 9am to 5pm
  • Saturdays 10am to 2pm

Standard Payment Options

  • VISA, Mastercard, American Express
  • PayPal Express
  • POLi Internet Banking
  • Manual NZ Bank Transfer

Q-Card Accepted

OxiPay

  • Buy Now, Pay Later
  • 4 Fortnightly Payments
  • No Interest, No Fees When Paid On-Time
  • Oxipay Up To $1000 Of Your Order (Maximum Order $1500)

Afterpay

  • Buy Now, Pay Later
  • 4 Fortnightly Payments
  • No Interest, No Fees When Paid On-Time

In-Store Payments

  • VISA, Mastercard, American Express
  • Cash
  • Q-Card
  • Oxipay
  • Afterpay

Menu
x

EASTER COUPONS - SPIN TO WIN Spinner icon